- Kataloog
- INSTALLATION DEVICES
- Timers and light intensity switches
- Staircase switches Ex9SSB 230V
Staircase switches Ex9SSB 230V
110558
8592765105585
Installation Staircase Switches Ex9SS are suitable mainly for light switching in many various residential, office and industrial applications, e.g. lighting of staircases or entrance areas. Their switching time can be adjusted up to 10 minutes using rotary switch on the front side, or they can be manually switched in ON state by the control slider. Ex9SSP having a "PROG" mode, which is enabling time prolongation by number of button pressing, e.g. If the set period is 5 min and you press button 3 times, the time period of switch ON will be 15 min. Reset of this period can be done by pressing the button for more than 2 sec.
| Function | Mechanical |
| Mounting method | Other |
| Width in number of modular spacings | 1 |
| Built-in depth [mm] | 59 |
| Number of contacts as normally open contact | 0 |
| Number of contacts as change-over contact | 1 |
| Control voltage 1 [V] | 230 |
| Type of control voltage 1 | AC |
| Frequency control voltage 1 [Hz] | 50/60 |
| Control voltage 2 [V] | 230 |
| Type of control voltage 2 | AC |
| Frequency control voltage 2 [Hz] | 50/60 |
| Rated switch current [A] | 16 |
| Max. switching current (cos φ = 0.6) [A] | 10 |
| Push button glow-lamp current [mA] | 100 |
| Wiring system | 3 and 4 wire configuration |
| Pre-warning of switching-off | Flickering |
| Current surge function selectable | Ei |
| Repetitive | Repetitive + continuous light |
| Supply voltage [V] | 230 |
| Voltage type of supply voltage | AC |
| Max. incandescent lamp load [W] | 2300 |
| Power loss [W] | 3 |